csci218/Assignments/BMI.c

@@ -1,109 +0,0 @@
-#include <stdio.h>
-#include <math.h>
-#include <string.h>
-#include <ctype.h>
-
-int main(){
-
-  // Declare Variables
-  // Float values for calculations
-  float bmi, weight, height, mostellar, duBois, boyd, lifeExpect;
-
-  // Int values to store the result of the scanf fucntion
-  int weightResult, heightResult;
-
-  // Char to store the gender with max length of 7 and a line string for formatting
-  char gender[7];
-  char line[] = "********************************";
-
-  // Display Program Purpose
-  printf("%s%s%s*\n", line, line, line);
-  printf("*\tThis program will calculate your BMI, Life Expectancy, and BSA(mulitple methods)\t*\n");
-  printf("*\twith just your weight(kg), height(cm), and gender.\t\t\t\t\t*\n");
-  printf("%s%s%s*\n", line, line, line);
-
-  // Read in weight, height, and gender from user
-  printf("Please enter your weight(kg): ");
-  weightResult = scanf("%f", &weight);
-  while (weight <= 0 || weightResult != 1) {
-    while (getchar() != '\n');
-    if (weight <= 0) {
-      printf("Bad Value: Weight must greater than 0! fmt: XX.X\n");
-    } else {
-      printf("Bad Value: Please enter a decimal input! fmt: XX.X\n");
-    }
-    printf("Please re-enter your weight(kg): ");
-    weightResult = scanf("%f", &weight);
-  }
-
-  printf("Please enter your height(cm): ");
-  heightResult = scanf("%f", &height);
-  while (height <= 0 || heightResult != 1) {
-    while (getchar() != '\n');
-    if (height <= 0) {
-      printf("Bad Value: Height must greater than 0! fmt: XX.X\n");
-    } else {
-      printf("Bad Value: Please enter a decimal input! fmt: XX.X\n");
-    }
-    printf("Please re-enter your height(cm): ");
-    heightResult = scanf("%f", &height);
-  }
-    
-  // Make sure correct values for gender are entered
-  while (1) {
-    // Read in gender from user
-    printf("Please enter your gender(male or female): ");
-    scanf("%s", gender);
-    
-    // Loop through all chars in gender and convert to lower case
-    for (int i = 0; i < strlen(gender); i++) {
-      gender[i] = tolower(gender[i]);
-    }
-
-    // Check if gender is valid
-    if (!(strcmp("male", gender)) || !(strcmp("female", gender))) {
-      break; 
-    } else {
-      printf("Bad value: Please enter either male or female\n");
-    }
-  }
-  
-
-  // Calculate the BMI
-  bmi = 10000 * (weight / pow(height, 2));
-
-  // Calculate the BSA(Mosteller's)
-  mostellar = sqrt((height * weight) / 3600);
-
-  // Calculate the BSA(Dubois)
-  duBois = (0.20247 * pow((height / 100), 0.725)) * pow(weight, 0.425);
-
-  // Calculate the BSA(boyd)
-  boyd = (0.0003207 * pow(height, 0.3)) * pow((1000 * weight), (0.6721 - (0.0188 * log10(weight))));
-
-  // Check if overweight and gender to select correct life expectancy message
-  // Only need to check one since the input screens to just two options
-  if (strcmp("male", gender)) {
-    if (bmi > 25) {
-      lifeExpect = 81.4;
-    } else {
-      lifeExpect = 83.5;
-    }
-  } else {
-    if (bmi > 25) {
-      lifeExpect = 77.3;
-    } else {
-      lifeExpect = 79.4;
-    }
-  }
-
-  // Display values and output
-  printf("For a %s with weight(kg) of %.1fkg and height(cm) of %.1fcm\n", gender, weight, height);
-  printf("You have a BMI of %.1f and a life expectancy of %.1f years\n", bmi, lifeExpect);
-  printf("You also have a BSA calculated using\n");
-  printf("   - Mosteller's:\t%.3f\n", mostellar);
-  printf("   - DuBois:\t\t%.3f\n", duBois);
-  printf("   - Boyd:\t\t%.3f\n", boyd);
-
-  return 0;
-}

csci218/Labs/Lab2/myBlink/myBlink.ino

@@ -11,13 +11,13 @@
 // the setup function runs once when you press reset or power the board
 void setup() {
   // initialize digital pin LED_BUILTIN as an output.
-  pinMode(7, OUTPUT);
+  pinMode(LED_BUILTIN, OUTPUT);
 }
 
 // the loop function runs over and over again forever
 void loop() {
-  digitalWrite(7, HIGH);  // turn the LED on (HIGH is the voltage level)
-  delay(250);                      // wait for a second
-  digitalWrite(7, LOW);   // turn the LED off by making the voltage LOW
-  delay(250);                      // wait for a second
+  digitalWrite(LED_BUILTIN, HIGH);  // turn the LED on (HIGH is the voltage level)
+  delay(15);                      // wait for a second
+  digitalWrite(LED_BUILTIN, LOW);   // turn the LED off by making the voltage LOW
+  delay(15);                      // wait for a second
 }

csci218/Labs/Lab4/dataRepresentation/dataRepresentation.ino

@@ -1,36 +0,0 @@
-void setup() {
-  // put your setup code here, to run once:
-  Serial.begin(9600);
-
-  int value = 151;
-
-
-  Serial.print("Binary of ");
-  Serial.print(value);
-  Serial.print(" is: ");
-  Serial.println(value, BIN);
-  Serial.print("Decimal of ");
-  Serial.print(value);
-  Serial.print(" is: ");
-  Serial.println(value, DEC);
-  Serial.print("Hexidecimal of ");
-  Serial.print(value);
-  Serial.print(" is: ");
-  Serial.println(value, HEX);
-  Serial.print("Octal of ");
-  Serial.print(value);
-  Serial.print(" is: ");
-  Serial.println(value, OCT);
-
-  for (int i = 0; i < 26; i++) {
-    Serial.write(i + 65);
-    Serial.print(" ");
-  }
-  Serial.println();
-
-}
-
-void loop() {
-  // put your main code here, to run repeatedly:
-
-}

csci218/Labs/Lab4/displayLetter/displayLetter.ino

@@ -1,21 +0,0 @@
-
-int i = 65;
-
-void setup() {
-  // put your setup code here, to run once:
-  Serial.begin(9600);
-
-}
-
-void loop() {
-  // put your main code here, to run repeatedly:
-  Serial.write(i);
-  Serial.print(" ");
-  i++;
-  if (i == 91) {
-    i = 65;
-    Serial.println();
-  }
-  delay(100);
-
-}

csci218/Labs/Lab4/example1/example1.ino

@@ -1,12 +0,0 @@
-void setup() {
-  // put your setup code here, to run once:
-  Serial.begin(9600);
-
-}
-
-void loop() {
-  // put your main code here, to run repeatedly:
-  Serial.println("Hello World!");
-  delay(500);
-
-}

csci218/Labs/triangleArea/triangleArea.ino

@@ -1,24 +0,0 @@
-#include <math.h>
-
-void setup() {
-  // put your setup code here, to run once:
-  Serial.begin(9600);
-
-  float area, p, a, b, c;
-
-  a = 3;
-  b = 4;
-  c = 5;
-
-  p = (a + b + c) / 2;
-
-  area = sqrt(p * (p - a) * (p - b) * (p - c));
-  
-  Serial.println(area);
-
-}
-
-void loop() {
-  // put your main code here, to run repeatedly:
-
-}

csci218/Lect/912class.c

@@ -1,12 +0,0 @@
-#include <stdio.h>
-
-int main() {
-
-  int userNum;
-  scanf("%d", &userNum);
-  if (userNum % 3) {
-    printf("is not a multiple of 3\n");
-  } else {
-    printf("is a multiple of 3\n");
-  }
-}